MAG-LED presents The Color Touch System (CTS), a simple
wireless LED technology that requires no expensive computer or complicated user manual to achieve vivid color light shows. With 1,000 colors to choose from Color Touch provides the client with a full spectrum of eye-catching lighting choices. Whether you are looking for set colors, a full color show, or both, The CTS brings solid state lighting to the next level of convenience.

CTS was designed with the user in mind, if you are comfortable with a TV remote you will be able to master CTS. That is because the command controls of CTS are based on a TV remote design. Color Touch is easy to use, simply set the desired intensities (0-9) for red, green, and blue on the infrared (IR) remote, and push the transmit button. The signal is picked up by the IR receiver, which then calibrates the LED arrays to the desired color. Each IR receiver can control 15 feet of LED strip which is called an IR group.

CTS saves the client money by not needing expensive software or the computer to run it on. Additionally, since CTS is wireless the client no longer needs to pay for the installation of the CAD 5 cables in the walls and floors which is standard in competing LED systems. Color Touch is easy to install, with its plug and play design Color Touch can be up a running in a minimal amount of time. The basic set-up entails connecting the arrays with the connector cables into the required IR groups, mounting them into the specified area with stick or screw in clips, connecting and mounting the IR receiver and plugging in the power cord. It really is that simple.

LED Wall Mounted Controller is a compact master network, lighting effects controller. This advanced networking version enables lighting designers the ability to control an unlimited collection of LED Effects RGB lighting products.

The full featured controller has onboard flash memory and the ability to assign multiple preset lighting effects. A user-friendly PC interface is available to lighting designers for the creation of lighting effects. Because of its unique construction, this RGB LED controller is much more cost effective and powerful compared to DMX512 systems, allowing special lighting effects to be designed more easily into your environments.

Random Fader
Colour Select
White Wheel
Rainbow Chase
Single gang box design
state of the art electronics
user programmable effects 'with LEd Effects software.

Mag-LED RGB Controller is a compact lighting effects controller with single RGB lighting channels. The traditional controller is enclosed inside a small module and immune from the elements.

Either an enclosed wall mount or desktop power supply applies power. Advanced networking versions of this controller provide the lighting designer with the ability to control an unlimited collection of our RGB lighting products. The full-featured controller possesses on board flash memory and the ability to assign multiple preset lighting effects. A user friendly PC interface provides the lighting designer with an easy input for the creation of lighting effects, limited only by their imagination.

The simplicity and low cost of our LED RGB Controllers is much more affordable and easy to understand as compared with DMX 512 systems, allowing for a wider opportunity for sales.

LED Effects’ Network Slave Controller is an inexpensive lighting controller in five basic configurations.

Red Green Blue (RGB) 3 channels of pulse-width modulated direct current to create millions of colors. This configuration is ideal for any product with 4 wire RGB inputs such as the RGB Gemtube or RGB Flex Strip. All products connected to one RGB controller will display the same colors and effects.

2 Wire Smart 2-wire networking up to 240 lamps not to exceed current limit. This controller is ideal for products with 2 wire networks such as MR16s and Smart RGB Gemtubes. With individual IDs, each lamp can display a different color or effect.

3 Wire Smart 3-wire networking up to 240 lamps without current limits. This controller is ideal for products with 3 wire networks such as floodlights and linear RGB illumination products. Each lamp can display a different color or effect.

Networking master Master controller for networks of slave controllers. This unit in conjunction with RGB, 2 Wire Smart or 3 Wire Smart network

slave controllers can control large networks of lighting products.

The LED Effects DMX Dimmer is a state-of-the-art, full featured, DMX512 dimmer module. This unit provides four 5 amp outputs designed
specifically for DC LED lighting applications. The LED Effects DMX Dimmer is provided power via UL recognized desktop or wall mount power
supplies.

Our innovative output design eliminates the problems experienced by designers using traditional AC dimmers not designed to drive LED style low voltage products. The DMX unit is 100% compatible with DMX512 effect boxes and lighting systems. Address can be set via front panel switches. A designer using our technology is ensured a low power, flicker free and extremely bright lighting system.

The MAG-LED Stream-to-Stream Converter is an inexpensive lighting controller and integrated power supply for LED stream or DMX512. It takes the stream or DMX512 data coming in from a source and decodes signal. The final dimmer values are then placed on the output wires of unit.

Red Green Blue (RGB) lamps are pulse-width modulated to create millions of colors.
The correct brightness data is selected from the data stream based on the internally set Line ID. Single color lamps are also available. Source information for these displays must come from an LED stream data generator like the LED Stream Effects Player or DMX driver software for a Microsoft Windows computer or some other stream data generator software.

Do you have an idea for a controller that we just dont currently offer or do you want to make something that is specifially tailored to your needs? If so we are more than happy to help you develope whatever you might want.