Designed for speciality lighting applications requiring very bright light, low voltage and low heat output, the Stream™ Flood can be programmed to chase, flash, or fade between all colours of the spectrum. The Flood utilizes high quality super bright LEDs and quality components that are not operated past specified limits. This ensures a bright, longlived and reliable product. Our easy clip system facilitates fast and economical installations in difficult locations, as well as convenient maintenance access.

Communications:
All of our lighting products can work with DMX
protocol, however to overcome the limitations
of DMX and the expensive cabling and power
requirements, LED Effects have developed two
new protocols that reduce cost and simplify
installation and programming.

The LED Stream Lighting System™ is a new
digital protocol that gives the lighting designer
complete control over his show or scene. It
can of course integrate with DMX512. This
system is much less expensive than competitor
systems, extremely simple to install and a
powerful solution for special effects lighting.

LED DingDotz™ - a miniature string of end to end locking connectors with low profile, self contained,colour changing RGB LED's. With the grid pattern of your choice, they can be wrapped around a column or installed on any flat surface, including fabrics, to create exciting visual effects.

Unlike other RGB illuminators, the LED Stream™ products support a 1 billion colour internal palette,providing the richest selection and range of hues and brightness. This new design allows for a 'free-form' choice of installation shapes. Designers are now free to design custom contours without limitation of typical grids required by most video wall technologies

The level of configured system sophistication can range from small areas to stunning visual effects to real-time video displays of any size LED DingDotz™ allow you to choose and configure the use of colour and movement. A typical small DingDotz™ installation consists of 120 dotz (a maximum of 128 feet or 60 meters) a DingDotz™ controller and a power supply. Amazing lighting effects in an affordable, easy to configure LED system! Larger systems and real-time Video Systems can be configured on a project by project basis.

2" GloTube. is a linear lighting system ideal for commercial and residential architectural illumination and highlighting applications. The sturdy aluminum extrusion supports 3. and 12. addressable RGB LEDs, or non-addressable monochrome LEDs covered by polycarbonate lensing available in clear or diffused white.

GloTube.s modular design package consists of 1. to 8.
lengths, each interconnected to illuminate indoor applications of unlimited length with color changing light.

This system can be configured to support LED Effects. Stream. or DMX512 lighting controls for creating full
featured custom light shows or pre-set color scenes.
Unlike other RGB illuminators, Stream products support a 1 billion color internal palette, providing the richest selection and range of hues & brightness. The LED 2" GloTube allows you to choose and configure the use of color and movement not possible with conventional lighting methods.

Applications:

Excellent for commercial and residential architectural illumination and highlighting applications, the MAG-LED bullnose Illuminator can be configured to support DMX512 lighting systems and is easily controlled by a DMX512 lighting console or a PC running any DMX compatible software. Unlike other RGB illuminators, RGB Stream Products support a 1 billion color internal palette, providing the richest selection and range of hues & brightness. This vast selection of color is limited to 17 million colors for Stream and DMX512.

TYPICAL APPLICATIONS:

MAG-LED's Hyrda puck is a digital colour changing high power LED spot providing lighting professionals with a high precision and sleek design solution for spotlighting and wall washing with rich, saturated colours and colour changing effcts.

The Wall Spot is a sealed product designed for both indoor and outdoor installations in wet or dry locations. The fixture is fully enclosed in a stylish and rugged die-cast aluminium housing and meets or exceeds specifications for use in wet locations.

The MagniLite LED Flood from Vivid Effect features a sturdy, corrosion-resistant, 443 alloy cast aluminium housing, door frame and optional yoke or adjustable slipfitter (to fit 2" pipe) for durable construction and excellent heat dissipation. The cast aluminium door frame comes pre-drilled for on-site installation of an optional vandal shield. The hinged door and stainless steel latches allow access to the LED board. All hardware is corrosion-resistant stainless steel.

The board consists of 612 or 765 single colour, or multiple colour, light emitting diodes. With multiple colour LEDs, the board can be computer controlled to create 16 million colour combinations. Tempered, shock-resistant 3/16" thick clear glass lens sealed into a cast aluminum door frame. Fixture is fully gasketed with extruded EPDM rubber.

The luminaire operates at 12V-DC and requires our 12-volt high perfomance power supply which can be "piggy-back" mounted onto the fixture, or remotely mounted in a heavy duty cast aluminium power supply housing. This luminaire is manufactured to meet UL standard 1598 for wet locations. All luminaires are pre-wired and factory tested.

Standard finish is TGIC polyester acrylic powder coat in MagniBronze or MagniGray. Available in a range of colours, including Smart MagniLite and DMX MagniLite designs, which can be programmed to chase, flash, or fade between all colours of the spectrum. The LED MagniLite utilizes high quality super bright LEDs and quality components that are not operated past specified limits. This ensures you a bright, long-lived and reliable product.

Put some sparkle back into the night sky with the LED Bridgelite. The Bridgelite can bring over 16 million colors to your city or town. Adone these lights to any type of syspension or truss bridge and watch it come to life.

The board consists of 351 mono, or multiple colour, light emitting diodes. With multiple colour LEDs, the board can be computer controlled to create 16 million colour combinations. Tempered, shock-resistant 1/8"" thick milky white polycarbonate lens sealed onto a cast aluminum housing. Fixture is fully gasketed with extruded EPDM rubber.

The luminaire operates at 12V-DC and requires our 12-volt high perfomance power supply which is mounted into the fixture, mounted in a heavy duty cast aluminium power supply housing. This luminaire is manufactured to meet UL standard 1598 for wet locations. All luminaires are pre-wired and factory tested.

The innovative LED LightBlock™ is a unique lighting fixture offering endless colour changing possibilities to enhance your environment. The infinite colour palette ranging from pretty pastels to deep intense hues makes the LED LightBlock™ ideal for entertainment, architectural and retail
applications.

Transform a look, highlight a feature, create an atmosphere. Each block houses powerful high efficiency LEDs, comprising of a mixture of Red, Green and Blue types to allow endless RGB colour mixing – making 16.7 million colours possible. There is no lamp to change and heat output is minimal.

The LED LightBlocks™ are exceptionally robust, durable and very cost effective – making them easy to install, run and maintain. The blocks can cross fade from any color to another or strobe if required as they feature fast response
on board micro controllers.

MAG-LED GemTube™ is a digital colour changing cove and accent light which comes in a variety of narrow and wide symmetrical beam angles. GemTube™ brings bright trimming, colour washing or highlighting colour changing lighting effects. GemTube™ is compact and extremely easy to install and service.

GemTube™ is a modular lighting unit and comes in 20º, 30º, 50º, 70º, 120º wide projection beam angles. Each length of GemTube™ can be controlled using Stream™, Smart™ or DMX512. GemTube™ can be programmed to perform colour changing effects such as mix, fade, or flash any combination of colors to produce a huge collection of color shades and lighting effects. RGB GemTube is ideal for applications where bright trimming, color washing or highlighting may be required.

The GemTube is compact and extremely easy to install and service. The RGB GemTube is free from the limitations of neon. GemTube™ is also capable of being flexed to provide a large band or curve and once encapsulated and sealed within its polycarbonate tube can be used in exterior applications.